Gyyr dvms 1600, Руководство пользователя

Страница: 20 / 28

18 June 5, 2003
Operation
This section describes how to perform the following routine
operations:
• Start or stop recording
• Monitor video live
• Operate PTZ cameras
• Search for clips or images
• Use the quick report feature
• Play back the last recorded clip
• Save clips to an archive drive
• Start sequencing mode
• View current hard drive capacity status
• Hot swap the removable drive
• Format the archive drive
• Restart (reboot) the DVMS 1600//800 unit
Note These operations can also be done remotely using
Remote Access Software (RAS) on a PC connected to
the DVMS 1600/800 unit.
The following table describes the front panel button functions as they
apply to operating activities.
Front panel operations
Control button Description
Cam 1 to 16 Select a specific camera to be displayed on the main
output monitor. Operating these buttons overrides
the programmed operation of the main monitor.
REC Enable and disable (toggle) local recording to the hard
drive.
PLAY Initiates local playback of latest video information
from the hard drive.
FUNCTION Activate secondary functions of the keyboard buttons,
including:
•
Accessing multi-screen display modes
• Sequencing
• Searching
• Generating reports without entering Program
mode
• Removing hot-swappable IDE/SCSI drive
+ Camera 1 Full screen camera sequence on main monitor
+ Camera 2 Activate the hot swap function. This allows you to
remove the hot-swappable IDE or SCSI drive without
having to power down the DVMS 1600/800 unit.
+ Camera 4 Display 2 x 2 images on main monitor. Activating
again selects next group (that is, 5 to 8).
+ Camera 9 Display 3 x 3 images on main monitor. Activating
again selects next group (that is, 10 to 15).
+ Camera 16 • Live mode: Displays 4 x 4 images on main
monitor.
• Program mode: To set up motion detection
zones, press the zone number (1 to 4), then
FUNCTION + Camera 16 to fill/remove the
zone number selected (1 to 4) in the entire
screen.
+ PLAY Activate the Search menu.