23
TITANIUM 400 AC/DC
FR
Import Config. : importation d’une clé USB une ou des configurations « USER » et ses JOB.
Export Config : exportation sur une clé USB la configuration « USER » en cours et ses JOB.
Import JOB: importation des JOB présents sous le répertoire USB\Portability d’une clé USB.
Export JOB : exportation sur une clé USB les JOB selon les procédés dans un répertoire USB\Portability.
TRAÇABILITÉ
Cette interface de gestion de soudage permet de tracer/enregistrer toutes les étapes de l’opération de soudage, cordon par cordon, lors d’une
fabrication industrielle. Cette démarche qualitative assure une qualité de soudage post-production permettant l’analyse, l’évaluation, le reporting
et la documentation des paramètres de soudage enregistrés. Cette fonctionnalité permet la collecte précise et rapide ainsi que la sauvegarde des
données demandées dans le cadre de la norme EN ISO 3834. La récupération de ces données est possible via une exportation sur clé USB.
1-
Création de la traçabilité
2- Création du chantier
3-
Traçabilité simple
- OFF
Sélectionner «START»
Sélectionner «REC»
Nom du chantier
Intervalle d’échantillonnage :
- Hold : Pas d’enregistrement des valeurs
Courant/Tension.
- 250 ms, 500 ms, etc. : Enregistrement des
valeurs Courant/Tension tous les X temps.
4-
Traçabilité complète
- ON
Définition :
• Un CORDON de soudage correspond à un cycle de soudage.
• La PASSE correspond au soudage sur l’ensemble du périmètre de la pièce à souder.
• La SOUDURE correspond à la jonction finie de deux pièces assemblées. La soudure est
donc constituée de une ou plusieurs passes.
• Le CHANTIER est composé d’une ou plusieurs soudures finies.
• Température
*
ON : Température de la pièce à souder en début de cordon.
• Longueur
*
ON : Longueur du cordon
*
les unités de mesure s’affichent en fonction du choix défini dans PARAMÈTRES/Unités de mesure.
Passe (ON/OFF)
Soudure (ON/OFF)
Température (ON/OFF)
Longueur (ON/OFF)
5-
Affichage Chantier/Cordon
6-
Identification
7- Validation