8
TITANIUM 400 AC/DC
FR
2
Procédé :
correspond à l’interface de soudage MMA ou TIG, elle donne accès :
• Purge gaz : par un appui long sur la l’icône du procédé
• Paramètre procédé : permet les réglages du procédés,
• Aux différentes fenêtres de réglages,
• JOB : donne accès aux différents modes de rappel de JOB.
3
Paramètres Procédé :
correspond à la fenêtre de paramétrage du procédé :
• En MMA : permet le réglage du sous-procédé (STD, PLS ou AC), du type d’électrode,
l’anti-sticking ….
• En TIG : permet le réglage du procédé (DC, AC voire Synergic), du sous-procédé (STD,
PLS ou AC), du diamètre d’électrode…
Commande à distance :
configuration des commandes à distance (mode TIG).
Énergie :
configuration du mode énergie, développé pour le soudage avec contrôle
énergétique encadré par un DMOS (voir page suivante pour + de détails).
4
:
correspond à la fenêtre des modes de rappel programme :
• JOB : création, sauvegarde, suppression et rappel de JOB.
• QUICKLOAD : rappel de JOB à la gâchette hors soudage.
• MULTIJOB : rappel de JOB à la gâchette en soudage.
• Connect-5 (C5) : rappeler des JOBs via un automate.
SOUDAGE A L’ÉLECTRODE ENROBÉE (MODE MMA)
BRANCHEMENT ET CONSEILS
• Brancher les câbles, porte-électrode et pince de masse dans les connecteurs de raccordement.
• Respecter les polarités et intensités de soudage indiquées sur les boites d’électrodes.
• Enlever l’électrode enrobée du porte-électrode lorsque la source de courant de soudage n’est pas utilisée.
• Les appareils sont munis de 3 fonctionnalités spécifiques aux Inverters :
- Le
Hot Start
procure une surintensité en début de soudage.
- L’
Arc Force
délivre une surintensité qui évite le collage lorsque l’électrode rentre dans le bain.
-
L’
Anti-Sticking
permet de décoller facilement l’électrode sans la faire rougir en cas de collage.
CHOIX DES ÉLECTRODES ENROBÉES
• Électrode Rutile : très facile d’emploi en toutes positions en courant CC et AC.
• Électrode Basique : utilisation en toutes positions CC et AC, elle est adaptée aux travaux de sécurité par des propriétés mécaniques accrues.
• Électrode Cellulosique : arc très dynamique avec une grande vitesse de fusion, son utilisation en toutes positions la dédie spécialement pour les
travaux de pipeline.
LES PARAMÉTRAGES DU PROCÉDÉ À ÉLECTRODE ENROBÉE (MMA)
Paramètres
Désignation
Réglages
Standard
(CC)
Pulsé
AC
Conseils
Type d’électrode
Rutile
Basique
Cellulosique
Le type d’électrode détermine des paramètres spécifiques
en fonction du type d’électrode utilisée afin d’optimiser sa
soudabilité.
Anti-Sticking
OFF - ON
L’anti-collage est conseillé pour enlever l’électrode en toute
sécurité en cas de collage sur la pièce à souder (le courant
est coupé automatiquement).
Choix de la
polarité
Directe (+=+ et -=-)
Inverse (+=- et -=+)
Le changement des accessoires en cas de passe en polarité
directe ou inverse est effectué au niveau du produit.