39
TITANIUM 400 AC/DC
EN
Non-pulsed duration
, 0 - 60 sec.
Smooth current phase manual or of a defined duration
Post-gas
0 - 60 sec.
Duration for which gas is released after the arc has stopped. It protects the weld pool
and the electrode against oxidisation when the metal is cooling down.
MUTLI TACK (TIG DC)
This is the same mode as the TIG DC TACK, but with a sequence of scores and defined stopping times as long as the trigger is held in.
Settings
Designation
Adjustable
settings
Description & advice
Pre-gas
0 - 60 sec.
Time to purge the torch and to protect the area with gas before ignition
Welding current
3 - 400 A
Welding current.
Pulsed duration
, 0 - 60 sec.
Manual pulsation phase or of a defined duration
Frequency
of pulsation
0.1 - 2500 Hz
Pulse frequency
Non-pulsed duration
, 0 - 60 sec.
Smooth current phase manual or of a defined duration
Post-gas
0 - 60 sec.
Duration for which gas is released after the arc has stopped. It protects the weld pool
and the electrode against oxidisation when the metal is cooling down.
Duration between 2
points
0.1 - 20 sec.
Time between the end of a point (excluding PostGaz) and the recovery of a new point
(including PreGas).
Welding in E.TIG mode
This mode allows constant power welding by measuring arc length variations in real time to ensure constant bead width and penetration. In case the
assembly requires the welding power to be controlled, the E.TIG mode can be used as it is designed to ensure that the welding power remains the
same regardless of the position of the torch.
Standard
(constant current)
E-TIG
(constant power)
2 mm
D
10 mm
D
5 mm
D
2 mm
D
5 mm
D
10 mm
D
JOB MEMORIZATIONS AND REMINDERS
The current settings are automatically saved and loaded at start up.
In addition to the current settings, it is possible to save and recall so-called «JOB» configurations.
There are 100 JOBS per welding process, the memorization concerns:
- The main parameter,
- The secondary parameter (MMA, TIG),
- Subprocesses and button modes.
