EN
37
Operating manual
ARCPULL 700
Translation of the original
instructions
.
2. EQUIPMENT DESCRIPTION
The GYSPOT ARCPULL 700 is a three-phase, inverter arc welder for welding consumables and fittings, including
threaded studs, internally threaded studs, insulation nails, pulling rings and rivet extraction rods, etc.) on aluminium-
and steel-based materials. It offers both a SYNERGY and MANUAL operating mode. The program menu allows you to
store and recall welding configurations. It has a PLC connection for automated control.
Fig 1: External view of the machine
1
2
3
6
4
9
8
7
1
Keypad
2
ON/OFF switch
3
Positive dinse for gun cables
4
Negative dinse for gun cables
5
Gun control-cable connection
6
Gun cables gas output
7
Gas inlet connected to the gas cylinder
8
PLC control connection system
9
Protective cover for USB update port
Fig 2: External view of the gun and its HMI (without the welding fork and accessories)