Gymna VACO 200, Руководство пользователя

Страница: 8 / 194

Vaco 200
8
1.2.2 Electrical safety
1.2.3 Prevention of explosion
1.2.4 Electro Magnetic Compatibility
1.2.5 Accessories
•
Only use the equipment in an area with facilities that meet
the applicable legal regulations.
•
Connect the equipment to an outlet with a protective earth
terminal. The outlet must meet the locally applicable
requirements for medical areas.
•
Do not use the equipment in an area where combustible
gases or vapours are present.
•
Switch off the equipment when it is not used.
•
Medical electrical equipment requires special precautions
for Electro Magnetic Compatibility (EMC). Follow the
instructions for the installation of the equipment.
See §2
.
•
Do not use mobile telephones or other radio, shortwave, or
microwave equipment in the vicinity of the equipment. This
kind of equipment can cause disturbances.
•
When the device operates in the vicinity of equipment
other than those mentioned in
§2.3
, verify that the Vaco
200 operates normally.
•
Only use the accompanying accessories that are supplied
by GymnaUniphy.
See §7.4 and §7.5 .
Other accessories can lead to an increased emission or a
reduced immunity.
•
Check the electrode cables and the electrodes at least once
a month. Check whether the insulation is still intact.
See
§5.1
.
•
Use always demineralized water with vacuum electrodes to
avoid lime deposits in the watertank, the tubes and the
sponges.
•
Use only moisten sponges. Too dry sponges can cause
burning of the skin under the electrodes.
•
Do not use vacuum electrodes with DC currents. The DC
currents cause damage to the vacuum cups by ionization.
OBJ_BUCH-62-001.book Page 8 Thursday, June 28, 2007 10:05 AM