10
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
To set the flash:
The flash can only be used when the camera is in Far mode .
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function.
This is the default flash setting.
3.
Press Flash button again for the icon to appear on the LCD screen.
This means the flash function has been “forced on” (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the
flash is ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen.
This will activate the automatic flash.
Note: A “low battery”
warning will appear on the LCD screen if there is insufficient battery power to
operate the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your
request. Macro shooting: slide the Macro/Far switch to
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
position which is on the left side of the camera
near to the USB slot, until icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to position which is on the left side of the camera near to the
USB slot,
until icon appear on the LCD screen, it indicates that the far shooting is on.
Note:
The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
11
No Flash,
Force Flash,
Auto Flash,
To set the flash:
The flash can only be used when the camera is in Far mode
.
1.
Press Flash/Up button.
2.
Press Flash button until the icon appears again. This will turn off the flash function. This is the
default flash setting.
3.
Press Flash button again for the
icon to appear on the LCD screen. This means the flash function
has been "forced on" (manual flash).
If the flash is not ready, LED will light up and the icon will flash repeatedly- wait until the flash is
ready before taking a photo.
4.
Press Flash button until the icon appears on the LCD screen. This will activate the automatic flash.
Note:
A “
low battery
”
warning will appear on the LCD screen if there is insufficient battery power to operate
the flash.
Macro/Far shooting
The camera has the function that capture object in very near distance or very far distance per your request.
Macro shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the
USB slot, until
icon appears on the LCD screen, it indicates the macro shooting is on.
Far shooting: slide the Macro/Far switch to
position which is on the left side of the camera near to the USB
slot, until
icon appear on the LCD screen, it indicates that the far shooting is on.
Note
: The camera is by default in Far shooting mode.
Содержание GVA12DC
Страница 1: ...Instruction Manual Digital Camera GVA12DC...
Страница 5: ...5 Getting to know your Digital Camera...
