Guilin Woodpecker Medical Instrument 28-780, Инструкция по эксплуатации

Страница: 5 / 25

3
4) Battery level:
The actual power of the battery is displayed in real time on the screen.
When the battery is fully charged, the power of the OLED display is
displayed as five grids. When the battery level is one grid, it indicates that
the battery is low and needs to be charged in time. When the battery level
is displayed as a space, it indicates that the battery is very low and needs
to be charged immediately.
Note: During normal use, try not to let the battery level reduced to
space status (completely no power) before charge, which will shorten the
service life of battery.
Warning:
If the device has not been used for more than one month, the battery
needs to be recharged. If the device is not in use for a long time, please be
sure to charge it at least once a month to protect the battery. The service
life of battery of Heating and Packing Instrument will be shortened when
it is in a low battery state for a long time or when it leaves the charging
base for a long time.
5) Temperature Level:
When the temperature is preset, the display screen shows the preset
temperature value. About 1s after the temperature preset, the OLED
screen will display the real-time temperature of the Work Tip. When the
Heating and Packing Instrument is in the heating state, the temperature
indicator will simultaneously display the current temperature of the Work
Tip.
6) Charging base:
Firstly, connect the power adapter plug to the power adapter as shown
in Figure 3. Then connect the power adapter to the power connecting hole
on the charging base as shown in Figure 4 and connect the power adapter
to a standard socket. Place the Heating and Packing Instrument correctly
on the charging base as shown in Figure 5, so that the charging connector
under the Heating and Packing Instrument can be reliably connected to
the output connector of the charging base. When the Heating and Packing
Instrument is properly connected to the charging base, the LED charging
indicator on the base will be on constantly. If the LED is flashing or not
lit, please check all the cables carefully.
There are charging status indicators on the charging base. When the
Heating and Packing Instrument is not placed on the charging base, the
indicator will flashes in yellow and green alternately. When the Heating