Guide THERMOPRO TP9, Руководство пользователя

Страница: 4 / 44

4
1. Cautions
The following cautions must be adhered to at all times and must be considered in addition to any advised
precautions issued at the relevant worksite or work area

Keep the THERMOPROTM TP9 IR Thermal Camera steady during operation.

Do not use the THERMOPROTM TP9 IR Thermal Camera in temperature exceeding its working and storage
temperature ranges.

Do not direct the THERMOPROTM TP9 IR Thermal Camera at very high intensity radiation sources such as
the sun, carbon dioxide lasers or arc welders etc.

Do not expose the THERMOPROTM TP9 IR Thermal Camera to dust and moisture. When operating the unit
near water, ensure that the unit is adequately guarded against splashes. Always replace the lens cap when
the unit is not in operation.

When the THERMOPROTM TP9 IR Thermal Camera is not in use or is to be transported, ensure that the unit
and its accessories are stored in the protective carry case.

Do not jam the holes or loudspeaker on the camera body.

Do not re-switch on the camera until 15 seconds later after switching it off.

Do not throw, knock or vibrate intensely the camera and its components in order to keep them from
damage.

Do not attempt to open the camera body, as this action will void the warranty.

Keep the SD memory card for the exclusive use of the camera.
The THERMOPRO
TM
TP9 IR Thermal Camera utilizes a Lithium Ion (Li-Ion) rechargeable battery pack. The
following safety precautions must be adhered to at all times to ensure the safe use of this equipment:

Do not disassemble or attempt to open the battery under any circumstances.

Do not expose the battery to fire or high temperatures.

Do not make the battery short circuit.

Do keep the battery off moisture or water.

Charging of the battery should only be carried out by using the recommended or supplied charging device.