30
TempUnit:
To set the temperature unit for
measurement
, degrees Celsius or Fahrenheit
FrameAver:
To set the number of frames for frame averaging algorithm to freeze image
，
The value are 1,4,8,16, the
larger the value , the less noise of the thermal image, but meanwhile, the possibility of blurred thermal
image by camera shaking, so keep as much as steady when you chose a large value.
Language:
To select the language for man-
machine
communication
VideoOut:
To turn on or off the video output function. PAL and NTSC can be selected as per requirements. The default
setting is off.
Date&Time:
To set date and time for the camera.
After
setup, date of the camera will automatically update.
Function option
Click option Function with the touch pen or press the joystick to select it. Then the Function dialog box appears on the
screen
Clicking each option box with the touch pen or pressing button S can toggle between the options. Clicking each value
respectively with the touch pen or moving the
joystick
up or down can alter values of the option.
When press the joystick vertically, the parameter will be saved and the will exit the parameter dialog. If you
abandon the revised parameter setting, press button C or click cancel button, the parameter will keep the
same as before.
Laser:
To turn on or off the laser locator. After setting On, keep button F3 depressed to turn on the laser locator.
Attention: the light from the Laser may harm human eyes, don’t aim human eyes during this operation.
Illuminator:
Turn on and off the illuminator function. When the function is on, in the real time operation,
press F1 can turn on or off this function.
Auto off
：
To turn on or off the auto turnoff function. There are 3 options of auto off: 10 Min, 30Min or 60Min. the
camera will automatically turn off if there is no
operation
on it in successive 10 minutes, 30 minutes or 60 minutes.
PowerAlarm:
To turn on or off the power
alarm
function. If setting on, the power alarm will sound every one minute
