READ & SAVE THESE INSTRUCTIONS
Before Each Use
WARNING
•
Wash and dry all parts thoroughly before reassembling. Remove all grease and oil from surface.
•
Read and understand all instructions and safeguards prior to using the food dehydrator.
Operating Instructions
WARNING
•
After turning off the power on the circuit board, the fan will continue to run for at least two
minutes in order to let the heater cool down. After the fan has stopped running, it is safe to
unplug the power.
1. Make sure power switch is turned off. Place the unit on a clean, dry surface away from
children and pets. Plug into an undamaged grounded electrical outlet.
2. Remove the racks from the dehydrator so that you can easily load them with your
items to be dried.
3. Follow your recipe for the food that you wish to dehydrate then place the food evenly
on the shelves provided. You can use cooking spray to help prevent sticking. Do not
allow food pieces to touch. Allow ample space between pieces for air circulation.
4. Remove any excess water from food by blotting with a paper towel. Excess moisture
may cause the temperature to drop.
5. Place shelves into the dehydrator.
6. Slide door into place.
7. After connecting to a power outlet, make sure that the power is adequately grounded.
The standard power supply is 120V, 60HZ.
8. Press the “POWER” button, the timing value and initial temperature will display on the
LCD screen. The initial temperature is in Fahrenheit.
9. To begin the initial set up, press the “SET” button once to adjust the hour. The clock function
will be flashing. Press the “+” to adjust the time upwards and “-” to adjust the time down. The
range is from 0 to 99.
10. Press the “SET” button twice to adjust the minute. The clock function will be flashing. Press
the “+” to adjust the time upwards and “-” to adjust the time down. The minute will increase in
5 minute increments. The range is from 0 to 55.
11. To adjust the temperature, press the “SET” button three times. The temperature value will be
flashing. The temperature will increase in 5 degree increments. The maximum temperature is
162 degrees Fahrenheit.
12. To change from Fahrenheit to Celsius, press and hold the “SET” button for at least 5 seconds
until flashing. Press “-” to switch to Celsius. The previous adjustment will remain the same as
the above.
13. Adjust the temperature knob to the desired temperature.
14. Push “Start” and the unit will begin to heat and the fan will turn on.
15. Water droplets may form on the surface of some products while dehydrating. These can be
removed by blotting the product with a clean towel or paper towel. Use caution, the
dehydrator becomes hot.
Содержание 1A-DS113
Страница 9: ...9 Main Parts of the Food Dehydrator 15 16 ...
