Information Tabs
The Service Interface contains several tabs that contain read-only information about the Artemis
system.
The Clients Tab
This gives the IP Address and Version Number of the Service Interface itself and any Dashboards
currently connected. It also shows which client – if any - has control of the local station.
The Alarms Tab
This contains a list of possible alarms and the current status of each:
The About Tab
Contains version
information for the Artemis
Control Software, contact
details for Guidance
Marine Ltd and buttons
for updating the software
on the Antenna Unit and
for opening an on-screen
version of this Installer’s
Guide.
!
Note: The Save Parameters, Restore Parameters and Update Sensor Software
buttons are enabled only if there is a serial connection between the Artemis
Manager and the sensor.
37
