Using the Artemis Service Interface
The Service Interface is a tool for configuring the Artemis system.
To open the Service Interface
1. Ensure that the Antenna Unit is powered on and connected to the control computer.
2. Double-click on the Service Interface icon:
(Alternatively, run from the Start menu:
Start > All Programs > Guidance Marine Ltd > Artemis > Artemis Service Interface
)
Screen Layout of the ASI
The upper part of the ASI window contains fields relating to communications, as follows:
Artemis Manager
- The state of the connection between the ASI and the Artemis Manager
(“Connected” or “Not Connected”).
Take Command / Relinquish Command
- This button allows the user to toggle the command
mode of the ASI between In Command and Monitoring.
In Command Indicator
- This red block symbol is visible when the ASI is In Command mode.
Sensor
- The state of the connection between the Artemis Manager and the sensor (“Connected”,
“Not Connected” or “Unknown”).
Validator
- Shows whether an Artemis Validator unit is connected to the Manager (“Connected” or
“Not Connected”).
The remainder of the CSI screen is occupied by one of several tab areas.
31