Gude Expert Net Control 2304, Руководство пользователя

Страница: 72 / 87

72
Expert Net Control 2304 © 2021 GUDE Systems GmbH
Specifications
4.9 Modbus TCP
If Modbus TCP is activated in the configuration, the ports (relays, outputs, eFuses) can
be switched and the following data is callable:
Address range overview:
Device Resource Start End Modbus Data Type
Power/Output/eFuse Ports 0x000 0x3ff Coils
DC Inputs 0x400 0x7ff Discrete Inputs
Stop Condition active 0x800 0x800 Discrete Inputs
POE active 0x801 0x801 Discrete Inputs
Status Power Sources 0x1000 0x100f Discrete Inputs
OVP active (Line-Ins) 0x1010 0x101f Discrete Inputs
eFuse Errors 0x1100 0x11ff Discrete Inputs
Info Area 0x000 0x005 Input Registers
CPU Sensor values 0x080 0x083 Input Registers
External Sensors 0x100 0x1ff Input Registers
Fan Level 0x200 0x20f Input Registers
Line Energy Sensors 0x400 0x39ff Input Registers
Port Energy Sensors 0x3a00 0x81ff Input Registers
Bank Energy Sensors 0x8200 0x823f Input Registers
Power Source Sensors 0x8240 0x827f Input Registers
Residual Current Monitor 0x8280 0x82cf Input Registers
Bank Power Source Select 0x000 0x00f Holding Registers
Fan Mode 0x010 0x01f Holding Registers
This chapter is general for all Gude devices. Depending on the device type, some
ports or certain sensors are not available.
All calculations in this chapter are based on addresses starting at "0". For some
Modbus TCP Utilities, however, the addresses start at 1, in which case a 1 must be ad-
ded to the addresses in this chapter. Please try both possibilities for tests!
The Unit-ID is ignored because the device is uniquely identified by its IP address.
Supported Modbus TCP Functions
Function Request Code
Read Coils 0x01
Read Discrete Inputs 0x02
Write Single Coil 0x05
Write Multiple Coils 0x0f
Read Input Registers 0x04
Read Holding Registers 0x03
Write Holding Register 0x06
Write Multiple Holding Registers 0x10
Read Device Identification 0x2B / 0x0E