Gude Expert Net Control 2304 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 87

Gude Expert Net Control 2304 Скачать руководство пользователя страница 6

6

Expert Net Control 2304

© 2021 GUDE Systems GmbH

Device Description

1

Device Description

1.1

Security Advice

·

The device must be installed only by qualified personnel according to the following
installation and operating instructions.

·

The manufacturer does not accept responsibility in case of improper use of the
device and particularly any use of equipment that may cause personal injury or ma-
terial damage.

·

The device contains no user-maintainable parts. All maintenance has to be per-
formed by factory trained service personnel.

·

Connect the device to the mains (230V AC) or to an AC Adaptor (10V to 24V AC,
12V to 28V DC, at 4 watts of power). Under no circumstances should the unit be fed
with the mains and the AC Adaptor at the same time!

·

The device is intended for indoor use only. Do NOT install them in an area where ex-
cessive moisture or heat is present.

·

Because of safety and approval issues it is not allowed to modify the device without
our permission.

·

The device is NOT a toy. It has to be used or stored out or range of children.

·

Care about packaging material. Plastics has to be stored out of range of children.
Please recycle the packaging materials.

·

In case of further questions, about installation, operation or usage of the device,
which are not clear after reading the manual, please do not hesitate to ask our sup-
port team.

1.2

Content of Delivery

The package includes:

·

Expert Net Control 2304

·

Quick Start Guide

1.3

Description

The

Expert Net Control 2304

can switch 8 different relay outputs and monitor 8 pass-

ive signal inputs. The device has the following features:

·

8 switchable, potential-free relay outputs, switching voltage 230 V AC 16 A / 24 V
DC, 10 A

·

Relays dispose of high contact reliability also at very small loads

·

8 passive inputs for monitoring NO and NC devices, e.g. door contacts, smoke de-
tectors etc.

·

Operation with 230 V AC or 24 V DC voltage

·

Optional sensor for environmental monitoring (temperature, humidity and air pres-
sure)

·

Console commands via SSH and Telnet

·

SSH support with public key and passwords

·

Individually parameterisable switch-on delay of all outputs

·

Programmable timetables and turn-on/turn-off sequences

«
...
4
5
6
7
8
...
»

Содержание Expert Net Control 2304
























































































Отзывы:

Нет отзывов