pneumatic oil to the air inlet. Then, refit the air hose and let
the impact wrench run for app. 30 seconds to allow the
compressor engine to clean out. After cleaning, follow the
lubrication instructions.
Troubleshooting
Problem
Possible cause
Problem solution
No power
Too small amount of
air (see Technical
specifications)
Bigger compressor
Insufficient air pressure Check the air pressure
on the air inlet. It must
be 6 bar.
Air pressure set too
low
Increase the pressure
to 6 bar
Impact wrench must be
lubricated with oil
See Lubrication
Impact wrench must be
cleaned out
See Servicing
Impact
wrench not
working or
working
too slow
Air hose is leaking
Tighten all the hose
screwing
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Germany
hereby declare that the design of the appliances below
corresponds to the applicable requirements of the basic EU
safety and hygiene directives.
In case of alternation of the appliance, not agreed
upon by us, this Declaration will lose its validity.
Appliance marking
PNEUMATIC IMPACT WRENCH - SET
Art. No.
#40039
Applicable EU Directives:
2006/42/EG
Applicable harmonized standards:
EN 792-6:2000+A1:2008
Date/authorized signature:
23. March 2012
Title of signatory:
Managing Director,
Mr.
Arnold
Technical documentation:
J. Bürkle FBL; QS
11
Содержание 40039
Страница 2: ...2 1 2 3 4 5 1 7 6 11 8 9 10 ...
Страница 3: ...3 ...