2004/108 EG
Harmonised standards used:
EN 55014-1:2006
EN 61000-3-2:2006
EN 61000-3-11:2000
EN 55014-2:1997+A1
EN 60204-1:2006
En 1870-6:2002
Certification place:
TÜV Rheinland Product Safety GmbH - Am Grauen Stein
D-51105 Köln
Guarantee
The guarantee solely covers inadequacies caused by material
defect or manufacturing defect.
Original payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as
appliance overloading, use of violence, damage as a result of
any unauthorised interference or caused by foreign items.
Failing to follow the operating and assembly instructions and
common wear are also not included in the guarantee.
Assigned Use
GWS 400 ECO is designed solely for cutting fuel wood of
required dimensions.
The manufacturer should not be held liable for damages upon
non-observation of general regulations and the present
instruction manual.
General Safety Instructions
Before you start working with the appliance please read
carefully the following safety regulations and Operating
Instructions. If any other person is to handle the appliance
provide him/her with the Operating Instructions. Keep the
Operating Instructions for future reference!
Package:
The appliance has been put in a package to
prevent any damage during transport. Packages are raw
materials so they can be reused or recycled.
Please read carefully the Operating Instructions and follow
them. Use these Operating Instructions to get acquainted
with the appliance, its corresponding use and safety
instructions. Keep the Instructions for future reference.
Caution!
Protection Devices
Removal/dismantle of the machine protection devices,
alteration, specific removal and installation of non-
genuine protection parts is strictly prohibited. Do not
perform any work related to replacements, routine and
schedule maintenance to be done with dismantled
protection parts unless the machine is unplugged. .
It is not sufficient to disconnect the power supply by
switching off!
Having finished the work return all the protection devices
to their places before you restore the connection to the
mains and switch the machine on. .
Operators
Poor operation of the circular saws may entail
considerable risk. For this reason, only apt persons are
allowed to get familiar with the machine. Persons under
16 years of age are not allowed to work with the saws.
When working, wear tight work clothing, protective
goggles and ear protectors.
Workplace and Machine Positioning
Flat and firm surface in the working area and sufficient space
around to allow for free movement by the machine. Is inevitable.
Therefore, the working area and the routes required for the feed
and collection of the wood should be kept clean, free of any
barriers and risks of tumble. The slippery spots, if any, should be
treated in an adequate way, e.g. sand. The sawdust and chips
should be cleaned away regularly.
The appliance meets EN 61000-3-11 requirements and is
subject to special connection conditions. That means that
use on optionally selected connection points is
inadmissible.
The appliance can lead to occasional voltage fluctuations
under unfavourable power conditions.
The appliance is only designated to be used for
connection points not exceeding the maximum allowed
impedance of Z
max
= 0,233
Ω
.
As a user, you must make sure your connection point on
which you want to use the appliance meets the above-
mentioned requirements – after agreement with your
electricity supplier if necessary.
Persons unable to operate the appliance due to their
physical, sensory or mental abilities or their
inexperience or lack of knowledge must not operate
it.
If the appliance, feeder cable or steel cable show any
sign of visible damage the appliance must not be put
into operation.
If the feeder cable of the appliance is damaged it
needs to be replaced by the producer or an
electrician.
Repairs of the appliance can only be executed by an
electrician. There might be significant risks as a
result of unauthorised repairs.
The same regulations apply for accessories
.
Güde GmbH & Co. KG does not answer for damages
caused by:
Appliance damage by mechanical influences and
overloading.
Any changes to the appliance.
Use for any other purpose than that described in the
Operating Instructions.
Unconditionally follow all safety instructions to
prevent accidents and damage.
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the injured
person from more accidents and calm him/her down.
For the sake of eventual accident, in accordance with DIN
13164, a workplace has to be fitted with a first-aid kit. It is
essential to replace any used material in the first-aid kit
immediately after it has been used. If you seek help, state
the following pieces of information:
1. Accident
site
2. Accident
type
3.
Number of injured persons
4. Injury
type(s)
Disposal
Disposal instructions are given by pictographs on the unit or
packaging. For meaning of individual symbols refer to chapter
“Symbols on Unit”.
Operator Requirements
The operator shall read the instruction manual carefully
before using the unit.
Qualification
No special qualification is required for use of the unit except
for detailed direction by a professional.
Minimum Age
Only persons above 18 years of age are allowed to work with
the unit. Exempted from the provision is the use of the
juvenile trainees if they work in the course of their
professional training with an aim to obtain the skill under a
trainer supervision.
9
Содержание 01837
Страница 2: ...1 7 2 3 4 5 6 8 2...
