Guca THERMO LAVA, Инструкция по установке и эксплуатации

Страница: 5 / 20

3.INSTALLATION
1. Chimney plug 9. Ahtray 17. Door
2. Back side 10. Culdron 18. Front side
3. Draught regulator 11. Primary air regulator 19. Button for secondary air regulation
4. Back side protector- brass 12. Lever of grid 20. winding bar (M8)
5. Back side- smaller 13. Door handle 21. stove frame- base
6. Hip side 14. Draught regulator button 22. smoke router
7. Hip side - smaller 15. Door-small 23. frame plate- kidney
8. Leg 16. Door handle 24. plate-frame
The stove is connected to the fl ue via appropriate smoke pipes so that the adequate
tightness and smoke fl ow to the fl ue. The smoke pipe must not be set too deep into the
fl ew in order not to decrease the surface of the cross-section and by that disturb the
draught in the fl ue.
The stove off ers possibility of exhaust of smoke gasses from the upper (position 1) or
back (position 2) side of the stove via appropriate couplings.
As a standard, a lid is set on the vack side, and the coupling for connection with the