Guca THERMO LAVA, Инструкция по установке и эксплуатации

Страница: 12 / 20

9.4 The glass gets dirty in a short time
Damp wood: use dry wood (max.20% moisture)
Wrong fuels (see allowed materials)
Too much fuel in the hearth space
Insuffi cient draft (see connection to the fl ue)
Wrong regulation of the registers: if the secondary air register is closed, the glass
gets dirty in a short time.
9.5 Condensation
During the initial lightings the condensation is normal, because the covering
materials contain dampness.
If the problem goes on, check the wood you use; it must not be damp or badly
dried.
The chimney must not have defects and it must not cool down the gas draining too
quickly.
Attention: The manufacturer exclusively uses materials which are not hazardous to
health. The manufacturer reserves the right to make modifi cations to the appearance, to
the dimensions or to the models themselves without previous notice.
10. DRAUGHT REGULATION
The combustion speed, and with that,
the quantity of the heat that the stove emits,
depend on the combustion air quantity
which is brought into the space under roast.
Regulation of the air quantity is automatically
achieved via draught regulator Rathgeber
which is set on the back side of the stove
(picture 7), or manually, by turning the
button on the front side of the stove which is
connected to the draught regulator (picture 1
position 14).
The button is turned with accessory
equipment and has two fi nal positions:
1. turning to the fi nal position in direction
shown on the picture 8.1 minimal draught is
obtained;
2. Turning to the fi nal position in direction
shown on the picture 8.2 maximum draught is
obtained;
Picture 7
Picture 8.1 Picture 8.2