1. INTRODUCTORY NOTES
Read the instructions carefully and follow the rules and recommendations.
Hereinafter you will fi nd the data regarding the stove itself, as well as the recommendations
for the installation and maintenance of the stove.
The effi
ciency of a stove depends on its correct installation, which must be carried
out by a professional following the highest standards and the safety regulations in force.
The place you intend to install the stove must have suffi
cient airspace and the fl oor
and surrounding object must be made of a non-fl ammable material.
Pay attention to the bearing capacity of the fl oor. In case that the fl oor cannot endure
the weight of the stove, it is necessary to reinforce it or set additional girders respecting
advices of experts. Moreover, if there is a fl ammable fl oor, it must be protected by an
insulating plate (steel, brass, marble, stone, etc.), which extends at least 50 cm from the
front and at least 15 cm from the sides.
Do not place armchairs, seats, curtains or any other fl ammable objects unmentioned
here within 100 cm from the stove, as well as within 70 cm on the sides, and 40 cm from
the back side.
The cast iron parts are protected by heat resistant paint and during the fi rst few
exploitations smoke and smells which are products of paint stabilization occur. The room
has to be properly ventilated. Avoid the presence of children, pregnant women, and
persons with breathing problems during the fi rst few lightings of the stove.
The stove is to work with the doors closed. Open the door only in the case of fuel
addition. Open the door slowly in order to equalize the pressure. Abrupt door opening
can cause smoke suppression. Add fuel only when ember is created and when there is no
intense fl ame.
Avoid using the stove under circumstances of unfavorable weather conditions and
strong wind.
The stove is heated during operation, so take the necessary measures of precaution.
The door handle is heated during operation so use a glove when opening the door. Do not
touch hot parts of the stove (above all cast parts, plate, and visible brass parts).
Children should not be allowed to play near the stove or handle it.
When fi lling the system with liquid, make sure that there is no air left. Do not use the
stove without liquid in the system.
Provide continuous fl ow of fresh air into the room where the stove is installed
because combustion uses the oxygen from the room.
Do not allow overheating of the stove parts because the stove will not be safe then
and its exploitation duration will be shortened.
Do not use the stove for the combustion of waste, inappropriate and unrecommended
fuels.
Parts of packing should be properly disposed. Elements from cardbox, wood or
plastic which are entered into the furnace space should be taken out before putting the
stove into operation. Be careful when taking out the packaging because wooden bars are
connected with nails.
Содержание THERMO LAVA
Страница 8: ...Picture 4 Scheme of closed system Picture 5 Scheme of open system ...
Страница 19: ......
Страница 20: ......