Guardian IPK-101 Скачать руководство пользователя страница 90

Страница: 90 / 132

KVM over IP

A freely available Dynamic DNS service (www.dyndns.org) can be used in the following

scenario.

Figure 5-19 Dynamic DNS Scenario

The IP-KVM is reachable via the IP address of the DSL router, which is dynamically assigned

by the provider. Since the administrator does not know the IP address assigned by the provider,

the IP-KVM connects to a special dynamic DNS server in regular intervals and registers its IP

address there. The administrator may contact this server as well and pick up the same IP

address relating to his IP-KVM unit.

The administrator has to register an IP-KVM that is supposed to take part in the service with

the Dynamic DNS Server and assign a certain hostname to it. He will get a nickname and a

password in return to the registration process. This account information together with the

hostname is needed in order to determine the IP address of the registered IP-KVM.

You have to perform the following steps in order to enable Dynamic DNS:

• Make sure that the LAN interface of the IP-KVM is properly configured.

• Enter the Dynamic DNS Settings configuration dialog as shown in Figure.

• Enable Dynamic DNS and change the settings according to your needs (see below).

Enable Dynamic DNS

This enables the Dynamic DNS service. This requires a configured DNS server IP address.

Dynamic DNS server

This is the server name where IP-KVM registers itself in regular intervals. Currently, this

is a fixed setting since only dyndns.org is supported for now.

DNS System

Choose Dynamic for free DNS service. Custom for your own domain.

Hostname

90 / 132

Содержание IPK-101





































































































































Результаты поиска

Содержание IPK-101

Отзывы:

Guardian IPK-101, Руководство пользователя, Страница: 90 / 132

Результаты поиска

Содержание IPK-101

Отзывы: