Guardian IPK-101 Скачать руководство пользователя страница 30

Страница: 30 / 132

KVM over IP

3.4

Keyboard, Mouse, and Video configuration

Between the IP-KVM and the host, there are two interfaces available for transmitting

keyboard and mouse data: USB and PS/2. The correct operation of the remote mouse depends

on several settings which will be discussed in the following subsections.

3.4.1

IP-KVM keyboard settings

The IP-KVM settings for the host's keyboard type have to be corrected in order to make the

remote keyboard work properly. Check the settings in the IP-KVM Web front-end for details.

3.4.2

Remote Mouse Settings

A common seen problem with KVM devices is the synchronization between the local and

remote mouse cursors. The IP-KVM addresses this situation with an intelligent

synchronization algorithm. There are two mouse modes available on the IP-KVM:

Auto mouse speed

The automatic mouse speed mode tries to detect the speed and acceleration settings of

the host system automatically. See the section below for a more detailed explanation.

Fixed mouse speed

This mode just translates the mouse movements from the Remote Console in a way that

one pixel move will result in n-pixel moves on the remote system. This parameter n is

adjustable with the scaling. Please note that this works only when mouse acceleration is

turned off on the remote system.

3.4.3

Automatic mouse speed and mouse synchronization

The automatic mouse speed mode performs the speed detection during mouse synchronization.

Whenever the local and remote mouse cursors move synchronously or not, there are two ways

for re-synchronizing local and remote mouse cursors:

Fast Sync

The fast synchronization is used to correct a temporary, but fixed skew. Choose the

option using the Remote Console options menu or press the mouse synchronization

hotkey sequence in case you defined one.

Intelligent Sync

If the fast sync does not work or the mouse settings have been changed on the host

system, use the intelligent resynchronization. This method takes more time than the fast

one and can be accessed with the appropriate item in the Remote Console option menu.

The intelligent synchronization requires a correctly adjusted picture. Use the auto

adjustment function to setup the picture, and make sure that there are no window at the

30 / 132

Содержание IPK-101





































































































































Результаты поиска

Содержание IPK-101

Отзывы:

Бренды по названию

Популярные бренды

Guardian IPK-101, Руководство пользователя

Результаты поиска

Содержание IPK-101

Отзывы:

Бренды по названию

Популярные бренды