KVM over IP
The common way to log events is to use the internal log list of the IP-KVM. To show the log
list, click on “Event Log” on the “Maintenance” page. In the Event Log Settings you can
choose how many log entries are shown on each page. Furthermore, you can clear the log file
here.
List logging enabled
The common way to log events is to use the internal log list of the IP-KVM . To show the
log list, click on “Event Log” on the “Maintenance” page.
Since the IP-KVM's system memory is used to save all the information, the maximum
number of possible log list entries is restricted to 1.000 events. Every entry that exceeds
this limit overrides the oldest one, automatically.
Warning
If the reset button on the HTML frontend is used to restart the IP-KVM, all
logging information is saved permanently and is available after the IP-KVM has
been started. If the IP-KVM loses power or a hard reset is performed, all logging
data will be lost. To avoid this, use one of the following log methods.
NFS Logging enabled
Define a NFS server, where a directory or a static link have to be exported, to write all
logging data to a file that is located there. To write logging data from more than one
IP-KVM devices to only one NFS share, you have to define a file name that is unique for
each device. When you change the NFS settings and press the button “Apply” , the NFS
share will be mounted immediately. That means, the NFS share and the NFS server must
be filled with valid sources or you will get an error message.
SMTP Logging enabled
With this option, the IP-KVM is able to send Emails to an address given by the Email
address text field in the Event Log Settings. These mails contain the same description
strings as the internal log file and the mail subject is filled with the event group of the
occurred log event. In order to use this log destination you have to specify a SMTP server,
that has to be reachable from the IP-KVM device and that needs no authentication at all
(<serverip>:<port>).
SNMP Logging enabled
If this is activated, the IP-KVM sends a SNMP trap to a specified destination IP address,
every time a log event occurs. If the receiver requires a community string, you can set it in
the appropriate text field. Most of the event traps only contain one descriptive string with
all information about the log event. Only authentication and host power events have an
own trap class that consists of several fields with detailed information about the occurred
event. To receive this SNMP traps, any SNMP trap listener may be used.
102 / 132
Содержание IPK-101
