Guardian IPK-101 Скачать руководство пользователя страница 105

Страница: 105 / 132

KVM over IP

management.

In order to configure the LDAP access, you can set the following options:

User LDAP Server

Here you enter the name or IP address of the LDAP server containing all the user entries. If you choose

a name instead of an IP address you need to configure a DNS server in the network settings. E.g.:

192.168.1.250

Base DN of User LDAP Server

Here you specify the distinguished name (DN) where the directory tree starts in the user LDAP server.

E.g.: dc=test,dc=domain,dc=com

Type of external LDAP Server

With this option you set the type of the external LDAP server. This is necessary since some

server types require special handling. Additionally, the default values for the LDAP scheme

are set appropriately. You can choose between a Generic LDAP Server, a Novell Directory

Service and a Microsoft Active Directory. If you have neither a Novell Directory Service nor a

Microsoft Active Directory then choose a Generic LDAP Server and edit the LDAP scheme

used (see below).

Name of login-name attribute

This is the name of the attribute containing the unique login name of a user. To use the default

leave this field empty. The default depends on the selected LDAP server type.

Name of user-entry object class

This is the object class that identifies a user in the LDAP directory. To use the default leave this

field empty. The default depends on the selected LDAP server type.

User search subfilter

Here you can refine the search for users that should be known to the IP-KVM.

Active Directory Domain

This option represents the active directory domain that is configured in the Microsoft Active

Directory server. This option is only valid if you have chosen a Microsoft Active Directory as

the LDAP server type. E.g.: test.domain.com

Using the RADIUS Server

RADIUS (Remote Authentication Dial In User Service) is a protocol specified by the Internet

105 / 132

Содержание IPK-101





































































































































Результаты поиска

Содержание IPK-101

Отзывы:

Guardian IPK-101, Руководство пользователя, Страница: 105 / 132

Результаты поиска

Содержание IPK-101

Отзывы: