Guardian IPK-101 Скачать руководство пользователя страница 119

Страница: 119 / 132

KVM over IP

The reason may be hidden in the very details of the Windows memory management

configuration. The issue was that Windows was allocating more memory to system cache than

to applications. Solving the issue is trivial:

(a) Go to Control Panel - System.

(b) In the Advanced tab, click Performance Settings.

(d) Memory Usage is probably adjusted for Best performance of System cache, change it to

Best performance of

Programs

(default value) and click OK.

(e) Restart computer. The problem should then disappear.

The target computer has started up, but local PS/2 keyboard or mouse won’t work.

Make sure your keyboard and mouse work fine if directly plugged into the target computer.

Since PS/2 keyboard and mouse are not hot pluggable, so we should

follow the power up

procedures

: power on monitor, power on IP-KVM, wait for IP-KVM startup complete (about

60 seconds), and then finally power on the Host (Target) computer.

(for standalone IP-KVM only) The target computer has started up, but local USB

keyboard or mouse won’t work.

119 / 132

Содержание IPK-101





































































































































Результаты поиска

Содержание IPK-101

Отзывы:

Guardian IPK-101, Руководство пользователя, Страница: 119 / 132

Результаты поиска

Содержание IPK-101

Отзывы: