GTO SW-1500, Руководство по установке

Страница: 34 / 45

30
Wires from Accessory
1
ON
2
3
4
15
CHARGING
POWER
STATUS
RF
PULL-PUSH
MODE1
MODE2
LOCK/BEACON
OFF 120
MIN MAX
STALL FORCE
CLOSE TIME
SET
LIMIT
LEARN
REMOTE
AUX OUT
SOLAR
PANEL
18VAC
RCVR
GRN
BLK
RED EXIT
SAFET
Y
EDGE
CY
CL
E
COMMO
N
LINK
Connecting Accessories
The
GTO/PRO SW 1500
can accept NORMALLY OPEN DRY CONTACT accessories, such as; Push Button Entry
Devices, Key Pads and Intercom Systems. Any safety device that pulls more than 40 mA DC must have its own power supply.
Refer to the accessory manufacturer’s instructions for
information about installing these devices on a vehicular
gate.
Make sure the power to the operator is
turned off before connecting safety device
wiring to the terminal blocks. Unplugging
the transformer does not turn power to the
operator OFF.
Accessory Input Connection:
Connect one of the accessory wires to the COMMON
(COM) terminal and the other to the CYCLE terminal on
the GTO/PRO SW 1500 control board.
Each activation of the accessory will cause the
gate to cycle as follows:
OPEN STOP CLOSE STOP
If not connecting accessories skip to next section.
1
ON
2
3
4
15
CHARGING
POWER
STATUS
RF
PULL-PUSH
MODE1
MODE2
LOCK/BEACON
OFF 120
MIN MAX
STALL FORCE
CLOSE TIME
SET
LIMIT
LEARN
REMOTE
AUX
OUT
SOLAR
PANEL
18VAC
RCVR
GRN
BLK
RED
EXIT
SAFET
Y
EDGE
CY
CL
E
COMMON
LINK
Wiring the Automatic Gate Lock
to the GTO/PRO SW 1500
Wire from LOCK
RED to AUX OUT (+)
BLACK to AUX OUT (–)
NOTE: The LOCK Control Board is
NOT used with the GTO/PRO SW 1500.
GTO/PRO Automatic Gate Lock
(FM143)
Make sure the power switch to
the
operator
is turned OFF before
connecting gate lock wiring to the
GTO/PRO SW 1500
terminal blocks.
The control board that comes with the
GTO/PRO Automatic Gate Lock is not used
when connecting the lock to the GTO/PRO
SW-1500
Connect the RED wire from the lock to the
AUX OUT (+) terminal, and the BLACK
wire from the lock to the AUX OUT
(–) terminal on the GTO/PRO SW 1500
control board.
Be sure DIP SWITCH #4 is set to the OFF
position.
The Automatic Gate Lock
unlocks and locks automatically as gates open and close. Used with the GTO/PRO®
system for maximum stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft.
long. Ideal for animal enclosures or high wind areas.