6
IMPORTANT SAFETY INSTRUCTIONS
Install Warning Signs
Entrapment Protection
GTO’s inherent obstruction settings, even when properly adjusted,
may not be sensitive enough
to prevent bodily injury
in
some circumstances
. For this reason, safety devices such as safety edge sensors (or photoelectric sensors), which stop and
reverse gate direction upon sensing an obstruction, are suggested for enhanced protection against entrapment.
Required Safety Precautions for Gates
Warning Signs
The warning signs (
at right
) must
be installed on both sides of the
gate (
see page 7 for details
).
Warning signs
alert people of automatic gate operation and are
required
when installing the
GTO/PRO® SW-1500
Automatic Gate Operator
. Furthermore, a walk-through gate must be installed if pedestrian traffic is expected near the
vehicular gate. We recommend using the
GTO Bulldog Pedestrian Gate Lock
(
Call the GTO Sales Department
) for
controlled access.
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
Warning Sign
Pedestrian Gate
Bulldog Pedestrian
Gate Lock
Vehicular Gate
Contact Sensor
(recommended, not included)
Contact Sensor
(recommended, not included)
Contact Sensor
(recommended, not included)
(recommended, not included
)
GTO indoor
Transformer
(surge protector
not supplied)
