PLEASE READ THIS FIRST!
iii
BEFORE YOU BEGIN TO INSTALL YOUR AUTOMATIC GATE OPENER:
watch the enclosed video and read these instructions carefully and completely
to become familiar with all parts and installation steps. The video is only designed
as an overview of the installation procedure. You must read the installation manual
for detailed instructions on gate opener safety and proper use of the gate opener.
Thank you for purchasing a
Mighty Mule® 352 E-Z Gate Opener
—GTO's "do-it-yourself" automatic gate
opener! When correctly installed and properly used, your
Mighty Mule® 352 E-Z Gate Opener
will give
you many years of reliable service. Please read the following information and watch the enclosed video to
ensure you have the correct system for your particular needs. Furthermore, this manual and the video will
enable you to properly install your
Mighty Mule® 352 E-Z Gate Opener.
The
Mighty Mule® 352 E-Z Gate Opener
is designed for installation on a
pull-to-open dual gate leafs
(gates that open
into
the property).
By purchasing an
accessory bracket (FM148)
, the
Mighty Mule®
352 E-Z Gate Opener
can accommodate a
push-to-open dual gate leafs (
gates that open
out
from the
property).
The gates must not exceed 8 feet and 550 pounds or exceed 16 feet and 150 pounds
(please
see Technical Specifications on page 10)
. The
Mighty Mule® 352 EZ Gate Opener
can be used on vinyl,
aluminum, chain link, farm tube, and wrought iron gates.
The
Mighty Mule® 352 E-Z Gate Opener
accommodates extra transmitters, digital keypads, solar panels,
push buttons, automatic gate locks, and other access control products. These optional accessories
(see
the enclosed Mighty Mule® Accessory Catalog)
are available at most stores. Your store should be able to
special order any accessory not in stock. If your store cannot special order accessories, please call the
GTO Sales Department (800-543-GATE).
The
Mighty Mule® 352 E-Z Gate Opener
features
adjustable obstruction sensing.
This safety feature
makes the gate stop and reverse direction within 2 seconds when it comes in contact with an obstruction.
MIN
is the factory setting; meaning the gate will exert the minimum force on an obstruction before it stops
and reverses direction.
The
Mighty Mule® 352 E-Z Gate Opener
also has an
adjustable auto-close feature.
After the gate
reaches the fully open position, it can be set to remain open up to 120 seconds before automatically
closing. Pressing the transmitter button at any time after the gate opens fully will cause it to close
immediately.
OFF
is the factory setting; meaning the gate will stay open until you press the transmitter (or
keypad, etc.) again.
PLEASE NOTE—
If your application requires any of the following:
Slide gates;
Heavy duty or commercial uses;
Professional installation;
please call GTO at
(800) 543-GATE [4283]
or
(850) 575-0176
for information about our
GTO/PRO
professional line of gate openers and accessories. Our Sales Department will be glad to give you the name
and phone number of a
GTO/PRO
dealer near you.
®
E-Z GATE OPENERS
Use on solid (surface) gates is not recommended. Solid surface gates have a
high resistance to the wind. If the wind is strong enough, the opener will obstruct
and stop, blow fuses, or may damage the equipment.
