GTCO CalComp BIT PAD TWO DATA, Руководство пользователя

Страница: 25 / 48

Bit Pad Two 25
4
5 (30,7)
(32,17) The increment is satisfied from the last point along the X axis only;
the Bit Pad Two issues the new report.
The increment is satisfied from the last point along the Y axis only;
the Bit Pad Two issues the new report.
Section B: Combining Characteristics
This section describes some of the nuances of combining primary modes and modifiers.

Reports are not issued in response to buttons being pressed when the data tablet is
in Remote Request Mode.

Reports are issued in response to either buttons being pressed or remote requests
when the data tablet is in Point, Stream or Switch Stream Mode.
 When the data tablet is in Stream, Switch Stream or Point Mode together with
Increment Mode and a button is pressed, the last coordinate pair that satisfies the
increment is reported.

When the data tablet is in Stream Mode and Increment Mode or Switch Stream
Mode and Increment Mode, reports are issued as follows:
o
A report cannot be issued until the increment has been satisfied.
o
If the increment has been exceeded and the Report Rate mandates that a
report be issued, the last coordinate pair that satisfies the increment is
reported.

When the data tablet is in Point and Increment modes, reports are issued as follows:
o
If a button is pressed, but the increment has not been met, the last
coordinate pair that satisfies the increment is reported.
o
If the increment has been exceeded and a button is pressed, the actual stylus
or cursor position is reported.