GSSI UtilityScan 50350HS Скачать руководство пользователя страница 27

Страница: 27 / 48

Geophysical Survey Systems, Inc.

UtilityScan with GS Software

Manual

MN71-307 Rev B

Overview of Menu Items and their Functions

This section assumes that you have either connected to an antenna and are in Collect mode or have

opened a previously recorded file in Playback mode. Any menu items that cannot be accessed in the

current mode will be grayed out.

The Global/Project Menu Stack

Tapping the collapsed menu icon in the top left will open the Global Stack. This grouping of items

provides general system information as well as parameters which generally do not change during a single

survey or job. This menu also contains collapsed submenus. Expand these by tapping the left-pointed

arrow next to each section heading.

Antenna

This section contains information specific to the individual

antenna that is connected. Much of this information is read from

the antenna and cannot be changed.

GPR Antenna:

The antenna model currently connected or used

to collect the played back data. This can only be changed by

connecting to a different antenna in the Collect/Playback screen.

Antenna S/N:

The serial number of the antenna currently

connected or used to collect the played back data.

Position Offset (pS):

The internal antenna time delay (in

picoseconds) from the system’s absolute time zero to the

generation of the trigger pulse in the transmitter. This is an

internal system parameter that is a factory setting and cannot be

edited.

SW Calibration #:

The survey wheel calibration value is

displayed here if using an internal survey wheel to measure

distance. This is not an editable field; it only displays the

calibration value input for the survey wheel. You will calibrate your survey wheel while in Collect Mode

using the Calibrate SW option located on the Control Bar (see Control Bar section above for survey wheel

calibration instructions).

Ext SW Cal #.:

The survey wheel calibration value is displayed here if using an external survey wheel.

This is not an editable field; it only displays the calibration value input for the survey wheel. You will

calibrate your survey wheel while in Collect Mode using the Calibrate SW option on the Control Bar (see

Control Bar section above for survey wheel calibration instructions).

Transmit Rate:

GPR operates by sending out pulses of energy. The transmit rate is the number of

thousand pulses per second (kHz) that the antenna is emitting. This value is set at the factory to the

maximum transmit rate allowable according to the regulations of the destination country specified at the

time of order.

List Antennas:

Tapping Rescan will cause the software to display the list of currently transmitting and

detected antennas.

Содержание UtilityScan 50350HS

















































Результаты поиска

Содержание UtilityScan 50350HS

Отзывы:

Похожие инструкции для UtilityScan 50350HS

Бренды по названию

Популярные бренды

GSSI UtilityScan 50350HS, Руководство пользователя

Результаты поиска

Содержание UtilityScan 50350HS

Отзывы:

Похожие инструкции для UtilityScan 50350HS

Бренды по названию

Популярные бренды