GSSI StructureScan Mini XT, Руководство пользователя

Страница: 46 / 69

Geophysical Survey Systems, Inc. StructureScan™ Mini XT
Manual
MN 70-813 Rev E 34
Viewing and Processing the Data
Preparing the Software
Before opening a file, you will need to set up some Global
Settings located on the right side of the screen. If the Settings info
(at right) is not shown, click the Global Settings button from the
Other Windows section of the Home tab. Click on the following
to change the parameters:
Auto Save Files:
Click here, then click on the down arrow to
select one of the following values:
• Yes:
Automatically save a processed file. RADAN will
automatically create a folder called “Proc” inside your
source directory and save processed data there.
• No:
You will be prompted to save a processed file.
Source Directory:
Click here, then click on the three dots to
browse to the source folder where you copied your source
(original) data.
Output Directory:
Click here, then click on the three dots to
browse to the output folder you created from your source folder.
You will not see this option if you have set your Auto Save File to
Yes.
Marker Style:
• Short:
Display user marks extending down a short distance from the top of the scan.
• Long:
Display user marks extending through entire scan.
• None
: Hide all marks.
Horizontal Scale:
• Show:
Display horizontal scale.
• Hide:
Do not display horizontal scale.
Grid Lines:
• Show:
Display grid lines.
• Hide:
Do not display grid lines.
Vertical Units:
Units for the vertical scale.
Horizontal Units:
Units for the horizontal scale.
GPS Units:
Different options to display GPS information, if it is available: (1) decimal degrees; (2)
degrees, minutes, seconds; (3) decimal degrees and minutes; and (4) UTM.
Auto-Switch Display:
• Yes:
The display will change based on the data file opened.
• No:
Data will open in the currently selected display.
Note
:
Once you open a file, you
cannot change any of the Global
Settings. You must close all files to
make changes.