GSSI SIR 30, Руководство пользователя

Страница: 61 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 55
OUTPUT OPTIONS > MANAGE FILES
DATA PATH:
This option allows the User to designate the target directory where the data files will be
stored. The system default path is \’ Common’. If ‘Common’ is selected, data files will saved with the root
name “FILE____###” where ‘###’ is the sequential numerical designation of the file. The User may
change the file name in the File Info section of the menu (See figure 17, page 21) prior to and after data
collection. By default, the numerical file designation will start at ‘001’ if no data has been previously
stored in the target folder. The User can create a new folder by clicking ‘NEW DATA PATH’ and typing
in a new folder name. New data files will be stored here and this new name will replace ‘FILE’ in your
data file’s root name. To collect additional data files to a previously created data path, just select it and
click ACCEPT.
Figure 83: New Data Path.
Note:
The maximum number of significant digits in a SIR 30 FILE NAME is three. When the file number
reaches 999 e.g. File__999.DZT, the file name numbers will reset to 001. e.g. File_001.DZT.
COPY/MOVE TO LAPTOP:
These options will only be visible if the User is running the SIR 30 from a
laptop. All data is stored on the SIR 30 internal hard drive. The data will have to be copied or moved to the
laptop before they can be reviewed or processed in RADAN 7.
Note:
When attempting to copy or move data, the User must make sure that there is a folder on the laptop
with the name ‘RADARDATA.’ Make sure that this folder is on the computer ‘Local Disk (C).’This folder
cannot be located in ‘My Documents’ or on the computer Desktop. This is the destination folder for the
data. If you select ‘Move’ the SIR 30 will delete the data file from the SIR 30 memory after it is
transferred to the laptop. GSSI recommends using the ‘COPY’ command, and then verify that the file has
been transferred to the laptop before manually delete it from SIR 30.
COPY/MOVE TO DRIVE E:
Drive E is a specially designated external storage drive for the SIR 30. It can
be a USB key plugged into the laptop or an external hard drive plugged into the SIR 30 External Storage
port.
DELETE FILES:
This option enables the User to DELETE selected files. Simply click on the file(s) you
wish to delete and then click ACCEPT.
NOTE:
The SIR 30 will not provide a courtesy check, so be sure you wish to delete the file before you
click DELETE. Note that this will only delete files in the currently selected path.