GSSI SIR 30, Руководство пользователя

Страница: 131 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 125
Part 4: Check That The Updates Occurred Properly (Essential)
a)
Click Done when you have completed Parts 1-3 (DO NOT TURN THE SYSTEM OFF).
b)
Exit the UI (DO NOT TURN THE SYSTEM OFF) and then run the SIR 30 UI using Prep for
System Upgrades button from the Maintenance tool.
c)
Click Versions and verify that the version numbers for DSP Firmware, GPR Control and GPR
Antenna have changed. If not repeat Part 1-4 until you see a change.
d)
Exit UI and Power down System and then Restart (At this point you have finished the updates).
e)
Verify under Versions that all the versions match the versions listed in the Release Notes if you
have not already done so.
f)
Verify that your system can drive an antenna.
Using the SIR 30 Maintenance Utilities To Set Up a SIR 30
Client Computer
Client computer Requirements
•
Windows 7 Business or higher (32 or 64 bit)
•
Windows Vista Business or higher (32 or 64 bit)
•
Intel Core I-5 or higher recommended
•
A PC User with Admin privileges.
Summary of Steps
The following is a summary of the steps that you will be performing to set your client computer. Please
follow the detailed instructions starting on the next page.
1
Create a SIR 30_Admin user and place the SIR 30_Admin user in the administrative and Distributed
COM users groups.
2
Install SIR 30 software after Logging in as the SIR 30_Admin user.
a)
Reinstall the SIR 30 software.
b)
Test the SIR 30 registry.
c)
Register the Server.
d)
Copy shortcuts.
e)
Connect to server ID.
f)
Fix welcome screen.
3
Operating System changes.
a)
Turn off password requirement.
b)
Modify power settings.