
4
Installing the Tower
Topics Covered in this Chapter
Installing the Main Tower to the Bin (FC Stiffened Bins)
Installing the Main Tower to the Bin (CTS Stiffened Bins)
Installing the Main Tower to the Bin (FC Stiffened Bins)
1. Align the top hole of the wall attachment plate (27) with the top hole in the stiffener (29). Using the
holes in the plate (27) ends as a template, field drill 7/16" holes (28) on the stiffener (29) flanges.
2. Similarly, position the top hole of the second plate (27) at 4' and top hole of the third plate (27) at 11'
below the top hole of the first plate (27). Mark and field drill 7/16" holes (28) on the stiffener (29)
flanges.
NOTE:
Two plates (27) per stiffener will be used for installing 10K version towers and three plates
(27) per stiffener will be used for 20K version towers.
Figure 4-1
Sidewall attachment plate location and field drill hole details
27
Sidewall attachment plate (EVT-0119-BS)
29
Stiffener
28
7/16" field drill holes
PNEG-2328
Grain Bin Eave Towers (30' - 48' Bins)
23