GSI Group PNEG-1421, Руководство по сборке и эксплуатации

Страница: 23 / 52

23
PNEG-1421 Direct Gear Drive Bin Sweep Auger
INSTALLATION
10. Install the Sweep Flighting
A. Assemble the U-joint.
1. Insert the stub into the u-joint.
2. Secure the u-joint using a 5/16" x 2" roll pin.
Drive the pin in with a hammer. (See Figure 10-A)
B. Attach the U-joint.
1. Slide the u-joint onto the top gear box output shaft.
2. Secure the u-joint using a 5/16" x 2" roll pin.
(See Figure 10-B)
C. Install the Pivot Bracket
1. Attach the Pivot Bracket to the left side of the gear
box using four (4) 3/8" x 3/4" Flange Bolts. (See
Figure 10-C)
Fig. 10-A
Fig. 10-B
5/16" x 2" Roll Pin
U-Joint
Stub
Top Gearbox
Output Shaft
U-Joint
5/16" x 2" Roll Pin
Fig. 10-C
3/8" x 3/4"
Flange Bolts
Pivot Bracket