38
SETTINGS
_______________________________________________________________________________
LNC oscillator frequency (
$
)
The receiver is pre-programmed for the following LNC oscillator frequencies:
– A 22 KHz off: 09 . 750 GHZ
– C 22 KHzoff: 09 . 750 GHZ
~
A 22 KHz on: 09 . 750 GHZ
~
C 22 KHz on: 09 . 750 GHZ
– B 22 KHz off: 09 . 750 GHZ
– D 22 KHzoff: 09 . 750 GHZ
~
B 22 KHz on: 09 . 750 GHZ
~
D 22 KHz on: 09 . 750 GHZ
These can be changed if you use an LNC with a different oscillator frequency.
1
Select the oscillator frequency to be changed using the »
,
,
or
.
.
« button.
2
Enter the new oscillator frequency using the »
1… 0
« buttons, or change it step by step using the
»
;
;:
:
« buttons.
Note:
If you are using a number of LNCs, all the oscillator frequencies will need to be checked and,
if necessary, "re-entered".
LNC voltage supply on/off (
$%
)
The LNC voltage supply is switched on as a factory setting. The receiver supplies power to the
satellite aerial.
If your receiver is connected together with other satellite receivers to a joint aerial (a so-called single
cable solution in the master distribution), you will need to switch off the LNC voltage supply (
$
%
–
).
1
Use the »
;
;:
:
« buttons to switch the LNC voltage ”off” (
$
%
–
) or ”on” (
$
%
✓
).
2
Press the »
OK
« button to save the setting.
– The main menu re-appears on the picture screen.
$
A
$
3
–A
09 . 750
~
A
09 . 750
–B
09 . 750
~
B
09 . 750
$
%
✓
Ǻ
/
OK
P
P
