24
TIMER PROGRAMMING
____________________________________________________________
Setting the time and day (
ȄȄ
)
Note:
If a mains failure occurs or when you disconnect the mains plug, the time is cleared and must be
set again.
Check the time and day and correct the setting if necessary.
1
Select the »
ѕѕ
19:28
SUN
« row using the »
,
,.
.
« buttons.
2
Use the »
.
.
« button to switch from hours (0 … 23) to minutes (0 … 59) and day, and the »
,
,
«
button to switch back from day to minutes (0 … 59) and hours (0 … 23).
3
Enter the current time with »
1 … 0
«, or select it with »
;
;:
:
«.
4
Select the day with »
,
,.
.
«, enter the current weekly day with »
;
;:
:
«.
5
Confirm the setting with »
OK
«.
– The main menu reappears on the picture screen.
Selecting a timer position 1 - 4 (
ѕѕ
)
Note:
Timer position 1 is a „Quick Timer“. If this position is selected, the timer is started 2 minutes after
the current time and stopped 2 hours and 2 minutes after the current time. In this way you may
start 2-hours recordings directly. It is of course also possible to select the time manually in the
same way as with the other timer positions.
1
Display the timer menu »
1
:
Ȅ
« by pressing »
1
« .
–
The first row »
ѕѕ
1
« is highlighted.
2
Enter the timer position number with »
;
;:
:
«.
ѕ
1
?
?
001
ѕ
●
ı
WED
WEEK 2
ѕ
●
ı
20:03
ѕ
●■
22:03
ѕ
–
ѕ
19:28
SUN
Ǻ
/
OK
