ENGLISH
25
TIMER PROGRAMMING
____________________________________________________________
Choosing a channel position (
?
?
)
1
Select the »
?
?
001
« row using the »
,
,.
.
« buttons.
2
Enter the desired channel position number with the buttons »
1 … 0
«, or select it using the
»
;
;:
:
« buttons.
Entering the day and week of recording (
ѕѕ
●
ı
SU)
1
Select the »
ѕѕ
WED
« row with the »
.
.
« button.
2
Select the day or DAILY (= daily recording a the same time) using the »
;
;:
:
« buttons.
3
With »
.
.
« you may switch from DAY to WEEK, with »
,
,
« you may switch back from WEEK to
DAY.
4
Select WEEK 1, 2, 3, 4 or WEEKLY (= weekly recording at the same time) using the »
;
;:
:
«
buttons.
Entering the start time (
ѕѕ
●
ı
)
Note:
To make sure that the required programme will still be recorded in its entirety, even if there is a
change in the transmission time, when programming the timer data you should always set the
start time a bit earlier and the stop time a little later than the times mentioned in the TV guide.
1
Select the »
ѕѕ
●
ı
20:03
« row using the »
.
.
« button.
2
You may switch between hours (0 … 23) and minutes (0 … 59) using the »
.
.
« button.
Press the »
,
,
« button to switch back from minutes (0 … 59) to hours (0 … 23).
3
Enter the start time using the »
1 … 0
« buttons, or select it using the »
;
;:
:
« buttons.
ѕ
2
?
?
001
ѕ
●
ı
WED
WEEK 2
ѕ
●
ı
20:03
ѕ
●■
22:03
ѕ
–
ѕ
19:28
SUN
Ǻ
/
OK
