26
TIMER PROGRAMMING
____________________________________________________________
Enter stop time (
ѕѕ
●■
)
Note:
Make sure the stop time is not earlier than the start time.
If a stop time is entered which lies before the start time, the Timer remains activated until the stop
time is reached next day
4
Select the »
ѕѕ
●■
22:03
« row using the »
.
.
« button.
5
You may switch between hours (0 … 23) and minutes (0 … 59) using the »
.
.
« button.
Press the »
,
,
« button to switch back from minutes (0 … 59) to hours (0 … 23).
6
Enter the stop time using the »
1 … 0
« buttons, or select it using the »
;
;:
:
« buttons.
Activating the
timer
function (
ȄȄ
)
7
Switch on the timer function (
✓
✓
) using the »
;
;
« or »
:
:
« button.
8
Save the setting with the »
OK
« button.
The main menu is displayed on the screen again.
9
Exit the menu by pressing the »
Ǻ
« button.
10
The receiver must be switched to standby using the »
Ǽ
« button before the start time is reached.
On the front panel of the receiver the green »
–
« is lit up as well as the red »
●
«.
This shows that the timer of the receiver is programmed.
Pre-programming the video recorder
Do not forget to pre-programme your video recorder accordingly for the timer recording.
ѕ
2
?
?
003
ѕ
●
ı
WED
WEEK 2
ѕ
●
ı
20:15
ѕ
●■
22:03
ѕ
–
ѕ
19:28
SUN
Ǻ
/
OK
