36
Troubleshooting
If a fault occurs, first refer to this information before you take the
device for repair.
If you are unable to rectify the fault using the information given
here, contact your specialist dealer.
Never under any circumstances attempt to repair the device
yourself, as this invalidates the guarantee.
INFORMATION
_______________________________________
Fault
The device cannot be
switched on
The security light
does not flash
Poor radio reception
Frequent loss of radio
reception
Not all loudspeakers
work
CD changer does not
work
Possible cause
Control unit not properly
attached
On/Off button pressed too
briefly
The function is not activated
You are in an area with poor
reception conditions
AF function is working in an
area with poor reception
Incorrect BALANCE and
FADER settings
The CD magazine is missing
or not latched in
Mechanical fault
CD magazine empty
Radio-CD connection
interrupted
CD incorrectly inserted
CD changer overheated
Remedy
Attach the control unit
again
Hold down the On/Off
button longer
Select the EXPERT settings.
If you can see »
BLK
OFF
« in the display, select
»
BLK ON
«
Wait until conditions
improve
Deactivate AF function
Check settings and
change if necessary
Note the error messages
in the display
Read the CD changer
operating manual
