12
Selecting the RADIO input source
1
Press »
IO
« to switch on the device.
– If the device was in RADIO mode when it was last switched
off, you will hear the last station selected when you switch it on
again.
2
If the device is in CD mode, press the »
RADIO
« button to switch
to Tuner mode.
– You will hear the station last selected.
3
In CD mode you can also press the »
SOURCE
« button to switch
to RADIO mode.
Selecting the frequency band
1
FM (VHF) band: Keep pressing the »
RADIO
« button until you
see the required frequency band in the display.
– Display: »
FM 1
«, »
FM 2
« or »
FM 3
«.
2
AM band: Keep pressing the »
RADIO
« button until you see
»
AM
« in the display, followed by the current frequency.
Note:
You do not need to switch between long wave and medium
wave since they are considered as a single reception band.
When you select a frequency band you will hear the last station
selected in that band. When you switch the device on you will
hear the last selected input source, and in RADIO mode you will
hear the station you were last listening to in the selected band
(Last Station memory function).
If you are listening to a stereo station you will see the »
!
«
symbol in the display.
Standby mode for radio traffic news (Traffic
Program)
Activating and deactivating the TP function
1
To activate the Traffic Programme function, press »
TP
« once
briefly.
– Traffic news standby is activated. Display: »TP«.
Note:
If you are tuned to a station which does not broadcast traffic
news, the device automatically searches for the next station
which does.
If the TP function is activated, CD mode is also interrupted for
traffic news.
RADIO (TUNER) MODE
_______________________
FM 3
AM
15 3
EN ER GY
TP
!
