10
Switching on and off
1
To switch on and off press »
IO
«.
Note:
If the device is switched on while the ignition is on, it then
switches off with the ignition and then on again, provided the
A 4
contact is connected to terminal 15 of the vehicle (see
page 29). To deactivate this function see page 24, EXPERT level.
If the ignition is off, the device automatically switches off after
an hour to avoid running down the battery. See also page 29,
A 4
.
Caution:
When the radio is switched on the automatic antenna extends!
Therefore switch off the device before entering a car wash!
Volume and tone settings
Setting the volume
1
Turn the »
VOLUME
« knob.
– The display shows the set volume (Scale »
00
« to »
46
«).
Tone settings
The following applies to FADER, BASS, TREBLE and BALANCE:
1
Press »
SOUND
« until the function is selected.
– FADER enables you to balance the volume between the front
and rear loudspeakers.
– BASS changes the bass setting (Scale »
-14
« to »
+14
«).
– TREBLE changes the treble setting. (Scale »
-14
« to »
+14
«).
– BALANCE enables you to balance the volume between the left
and right loudspeakers.
BASIC FUNCTIONS
______________________________
VOL
1 0
FAD F-- R
BASS
0 0
TREB
0 0
BAL L-- R
