ENGLISH
15
Tuning to RDS stations with station search
1
Press »
RADIO
« to select the frequency band.
– Display: »
FM 1
«, »
FM 2
«, »
FM 3
« or »
AM
«.
Note:
To start a search in the FM band the IS function must be
deactivated. To do this, press »
<
« or »
>
« until you hear the
signal.
– Display: briefly »
IS - -
«, then »
IS OFF
«.
2
Briefly press »
<
« or »
>
« to start the search in the direction you
require.
3
If a station with a name code is found, this will appear in the
display.
Note:
To store the selected station on one of the preset buttons, see the
instructions on page 15.
The search in the FM bands uses two sensitivity levels. The first
cycle looks for stations with strong signals (local stations), while
the second cycle looks for stations with weaker signals (remote
reception).
Manual station search
1
Press »
RADIO
« to select the frequency band.
– Display: »
FM 1
«, »
FM 2
«, »
FM 3
« or »
AM
«.
2
Press »
<
« or »
>
« until you hear two signals.
– The manual station search is selected.
3
Hold down »
<
« or »
>
« for fast tuning. Press »
>
« once to
increase the FM frequency by 50 kHz. Press »
<
« to lower the
frequency by the same amount.
Note:
To store the selected station on one of the preset buttons, see the
instructions on page 15.
RADIO (TUNER) MODE
______________________________
FM 3
FM
99 4 0
RADIO N1
FM 3
MAN 92 90
