Grundig New York 40 CLX 8670 BP, Инструкция пользователя

Страница: 98 / 122

ENGLISH 98­
10­
Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
V
« or »
Λ
« and press
OK
« to select
and mark or unmark the »Free« and/or
»Scrambled« items.
11­ Press »

« (red) to start searching.
Notes:
7
When updating via the same satellites a
security query is displayed at the start of a
search.
7
If the previously stored channels should
be retained in the channel list and the new
channels found be added to it, then press
»

« (green).
7
If »

« (red) is pressed, the saved channels
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
7
The search can be aborted with » EXIT «.
12­
Switch to the Channel Editor with »

«
(yellow);
or
press »
EXIT
« to end the setting.
Antenna­settings­for­DiSEqC­
1.0/1.1­and­searching­digital­
channels­from­a­satellite­auto-
matically
Note:
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1­
Open the menu with »
MENU
«.
2­ Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press » OK « to confirm.
3­ Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4­
Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
5­ Select the option »Satellite (DVB-S/S2)«
with »
V
« or »
Λ
« and press » OK « to
confirm.
6­ Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press » OK « to confirm.
– The »Antenna Settings« menu is dis-
played.
7­
Select and set the required option for the
antenna settings with »
V
« or »
Λ
«:
Satellite
Press » OK « then select the required satel-
lite with »
V
« or »
Λ
« and press » OK « to
confirm.
LNB­Type
Press » OK « then select the required LNB
Type with »
<
« or »
>
«, enter the required
data and confirm with »

« (green).
LNB­Power
Set the LNB power to »Off«, »13/18V« or
»14/19V« depending on the LNB type by
using »
<
« or »
>
«.
LNB­selection
See DISEqC mode.
SETTING­FURTHER­CHANNELS
­-----------------------------------------------------