Grundig New York 40 CLX 8670 BP, Инструкция пользователя

Страница: 97 / 122

97­ ENGLISH
SETTING­FURTHER­CHANNELS
­-----------------------------------------------------
Antenna­settings,­SCR­system­
and­searching­for­digital­chan-
nels­from­a­satellite­automati-
cally
Notes:
7
Your TV supports SCR system (Single Chan-
nel Router – EN 50494).
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1­
Open the menu with »
MENU
«.
2­ Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press » OK « to confirm.
3­
Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4­ Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press » OK « to
confirm.
5­ Select the option »Satellite (DVB-S/S2)«
with »
V
« or »
Λ
« and press » OK « to
confirm.
6­
Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press »
OK
« to confirm.
– The »Antenna Settings« menu is dis-
played.
7­ Select and set the required option for the
antenna settings with »
V
« or »
Λ
«:
Satellite
Press » OK « then select the required satel-
lite with »
V
« or »
Λ
« and press » OK « to
confirm.
­ LNB­type­
If your antenna system is equipped with a
single-cable system multiswitch, use the op-
tion »Grundig SCR«. Press »
OK
« and select
the »Grundig SCR« option with »
<
« or »
>
«.
Select the »LNB-Frequency High« line with
»
V
« and enter the frequency with »
1...0
«
in five digits.
Select the »LNB-Frequency Low« line with
»
V
« and enter the frequency with »
1...0
« in
five digits.
Confirm the settings with »

« (green).
­ LNB­Selection­
Depending on the number of LNBs, select
the option with »
<
« or »
>
«.
»1/2« if only 1 LNB is used; if two LNBs
are used, select the required LNB
(»1/2« or »2/2«).
­ User­Band­
Select the number of the antenna socket
used with »
<
« or »
>
«.
UB­Frequency­(MHz)
Enter the required frequency for the selected
antenna socket with » 1...0 «.
User­Band­(Sub)
Select the number of the second selected
antenna socket used with »
<
« or »
>
«.
UB­Frequency­(MHz)­(Sub)­
Enter the required frequency for the second
selected antenna socket with » 1...0 «.
Notes:
7
Use installation equipment supported / sug-
gested by your SCR Switch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed
during installation.
7
User band and user band frequency is
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
8­ Exit the antenna settings with »

« (blue).
9­
Select the Channel Type.
Press »
V
« or »
Λ
« to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (D Radio) and press »
OK
« to
select and mark or unmark the »Digital«
and/or »Radio« items.