Grundig New York 40 CLX 8670 BP, Инструкция пользователя

Страница: 89 / 122

89­ ENGLISH
NETWORK­SETUP
­-------------------------------------------------------------------------------------------
Technical­requirements­
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
Wireless­WPS­network­connection­
through­by­pressing­a­button
1­ Open the menu with » MENU «.
2­
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3­ Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
4­ Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press » OK « to
confirm.
5­
Select the option »Wireless WPS« with »
V
«
or »
Λ
« and press »
OK
« to confirm.
– WiFi warning message will be displayed.
6­ Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
<
« or »
>
« and
press » OK « to confirm.
7­ Select the line »WPS Type« with »
V
« or
»
Λ
« and select the option »Push Button«
with »
<
« or »
>
«.
Çhange Connection Type Wireless WPS
WiFi On
WPS Type Push Button
Select Access Point N/A
Network Configuration Auto
Wake-on-LAN Off
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > Network
Change Area Connect Test Connection Input Mode Exit Back EXIT BACK
8­ With »

« (red) select »Connect« to establish
modem connection.
– »Push the WPS button on your Access
Point« message is displayed.
9­
Press the WPS button on the router.
10­
To continue after pressing the WPS button
on the access point, select the option »Con-
tinue« with »
<
« or »
>­
«and press »
OK
« to
confirm.
– The “Connection to Gateway: Success”
message will be displayed.
11­ Press »

« (green) to make sure that the
network connection is established with the
current settings.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
12­ Press » EXIT « to end the setting.
Wireless­WPS­network­connection­with­
PIN
1­ Open the menu with » MENU «.
2­
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3­ Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
4­ Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press » OK « to
confirm.
5­
Select the option »Wireless WPS« with »
<
«
or »
>
« and press »
OK
« to confirm.
– WiFi warning screen will be displayed.
6­ Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
<
« or »
>
« and
press » OK « to confirm.
7­ Select the line »WPS Type« with »
V
« or
»
Λ
« and select the option »PIN« with »
<
«
or »
>
«.
Çhange Connection Type Wireless WPS
WiFi On
WPS Type PIN
Select Access Point N/A
Network Configuration Auto
Wake-on-LAN Off
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > Network
Exit Back
EXIT BACK Change Area Change Mode