Grundig GCI-F0505B, Руководство пользователя

Страница: 85 / 101

12.2. Sequence
The Sequence function supports in total eight Sequences; each Sequence consists of up to 64 Preset Points.
Please refer to the instructions below to program a Sequence.
NOTE: Before setting this function, users must pre-define at least two Preset Points.
Sequence Setting:
- Sequence No.:
Please select a number for the Sequence to be set from the drop-down list.
- Sequential Preset Points Setting:
Please set up each Preset Point of the programmed Sequence in order, assigning a Preset Point from the “Name”
list to the specified number of Preset Point and entering the Dwell Time (0~255 sec.) into the corresponding field.
- Sequential Reset:
To reset the sequence setting of each line, please press the “Reset” button in the top right corner of the setup
page. Then press the <
√ > button on the left to refresh the page in order to enter the new settings.
When finishing the sequential Preset Points setting, please click on the button “Save” in the top right corner of
the Sequence setting menu.
Sequence Run:
Select the specified Sequence No. from the drop-down list and press the arrow/point button. Then the camera
will start moving forward by each scene sequentially as programmed.
To view the camera executing a Sequence in full screen mode, please move the mouse cursor onto the live view
pane, right-click and left-click to select “fullscreen”. Then users can view the camera navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane, right-click, hold the click and
drag the camera in any direction.
83 English