Grundig GCI-C0745P-1, Руководство пользователя

Страница: 79 / 99

11.7. Privacy Mask
The Privacy Mask function aims to avoid any intrusive monitoring. When setting a mask, it is suggested to set it at
least twice bigger (height and width) than the masked object. The Dome Camera will assume that the center of
the selected view is the starting point. Therefore, please keep the target object/region positioned in the center of
the scene. Please refer to the following descriptions for setting up a privacy mask.
NOTE: The Image Flip function (see section 11.10. Camera — Miscellaneous Setups 1) and the Image Inverse
function (see section 11.11. Camera — Miscellaneous Setups 2) will be disabled automatically when the Privacy
Mask function is enabled.
Mask Setting :
- Switch:
The Privacy Mask function can be activated or disabled. Click on the button “Set” to save the setting.
- Transparency:
The Privacy Mask can be set as transparent if necessary.
- Colour:
Select a desired colour from the “Colour” drop-down list for the specified Privacy Mask.
Click on the button “Set” to save the Privacy Mask’s colour properties.
- Mask:
Specify the number of the programmed Privacy Mask in the corresponding field. The number of Privacy Masks
varies with the camera models.
- HSize/VSize:
The size of a Privacy Mask can be customised through specifying its horizontal and vertical size. The value of the
“Horizontal Size” ranges from 1 ~ 80, while the “Vertical Size” value ranges from 1 ~ 60.
After finishing the setup of a Privacy Mask, please click on the “Add” button to save the programmed Privacy
Mask.
77 English