manualshive.com logo in svg

Grundig GCI-C0745P-1, Руководство пользователя

Поделиться
Скачать
Grundig GCI-C0745P-1 Скачать руководство пользователя страница 45

 

- Time interval (sec) [0-7200]:
The default interval is 10. This value is the interval between each detected motion.

Triggered Action (Multi-option) :
The Administrator can specify alarm actions that will take place when motion is detected. All options are listed as 
follows:

 

- Enable Alarm Output 1/2:
Check this item and select the predefined type of alarm output to enable alarm relay output when motion is 
detected.

NOTE: Please make sure that the local recording (with Micro SD/ SDHC card) is activated so that this function can 
be implemented. See section 9.10. 'Recording (on Camera)' for further details.

 

- Send Message by FTP:           
The Administrator can choose to send an alarm message by FTP when a motion is detected.

 

- Send Message by E-Mail:
The Administrator can choose to send an alarm message by E-Mail when a motion is detected.

 

- Upload Image by FTP:
After selecting this item, the Administrator can assign a FTP site and configure various parameters as shown in 
the figure below. When the alarm is triggered, event images will be uploaded to the appointed FTP site.

The <Pre-trigger buffer> recording function allows users to check what happened to trigger the alarm. The pre-
trigger buffer time range is from 1 to 20 frames.

On the other hand, the <Post-trigger buffer> is for uploading a certain amount of images after the alarm input is 
triggered. The post-trigger buffer time range is from 1 to 20 frames. 

Check the box <Continue image upload> to upload the triggered images during a certain time or keep uploading 
until the trigger is off. 

 

- Select <Upload for __sec> and enter the duration in the blank. The images of the duration will be uploaded via 
E-Mail when the alarm input is triggered. The setting range is from 1 to 9999 seconds. 

 

- Select <Upload while trigger is active> to keep the images being uploaded via E-Mail while the trigger is active, 
i.e. until the alarm is stopped. 

Set the Image frequency as the upload frame rate. The setting range is from 1 frame to 15 frames.

 

- Upload Image by E-Mail:
After selecting this item, the Administrator can assign an e-mail address and configure various parameters as 
shown in the picture below. When a motion is detected, event images will be sent to the appointed e-mail address.

43

English

Содержание GCI-C0745P-1




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды