Alarm Setting :
- Alarm Switch:
The default setting for the Alarm Switch function is <Off>. Enable this function by selecting <On>. Users can also
activate the function according to the schedule previously set in the <Schedule> setting page. Select <By
schedule> and click <Please select…> to choose the desired schedule from the drop-down menu.
Alarm Type :
Select an alarm type, “Normal close” or “Normal open”, that corresponds with the alarm application.
Alarm Output :
Define the alarm output signal as “high” or “low” for the normal alarm output status according to the current
alarm application.
Triggered Action (Multi-option) :
The Administrator can specify alarm actions that will take place when the alarm is triggered. All options are
listed as follows:
- Enable Alarm Output 1/2:
Check this item and select the predefined type of alarm output to enable alarm relay output when motion is
detected.
- Send Message by FTP:
The Administrator can choose to send an alarm message by FTP when an alarm is detected.
- Send Message by E-Mail:
The Administrator can choose to send an alarm message by E-Mail when an alarm is triggered.
36
English
Содержание GCI-C0745P-1
Страница 2: ......